Derale Series 8000 Plate-Fin Transmission Cooler Kit Installation - 2018 Nissan Frontier- Video

Hey everybody, Ryan here at etrailer. Today on our 2018 Nissan Frontier, we're going to be taking a look at and showing you how to install the Derale Series 8000 Plate-Fin Transmission Cooler. this is what the transmission cooler is going to look like on the front of your Nissan. Now, in our case, we just left the front of the grill off, that way we could actually see what we're talking about here. A lot of our midsize truck customers use their vehicles to do quite a bit of towing. Whenever you're doing that, that can put some extra wear and tear on your transmission. more

Watch Video

3/20/2020 7:07:07 AM

Transmission Cooler Installation - 2007 Nissan Murano- Video

Today in our 2007 Nissan Murano we'll be installing the Derale Series 8000 Plate-Fin Transmission Cooler with Barb Inlets, part number D13503. We're going to go ahead and start out by removing this under-body panel right here. We have push fasteners here and a couple of Phillips head fasteners. Let's go ahead and take a flat blade screwdriver, get underneath the edge of the push fastener. If you have a trim panel removal tool that will also help you get underneath the fastener and pull it out. You just have to work from side to side until they loosen up. There are a couple of Phillips head fasteners here so we'll go ahead and just take a Phillips screwdriver and undo those. Some of them just like to come right out and some of them can put up a little fight. Just work your way across and remove them. Now let's go ahead and set this aside for re-installation later. Now, if you're able to turn your wheel in you'll have more access here to the inner fender well. more

Watch Video

6/1/2015 2:01:47 PM

Transmission Cooler Installation - 2014 Nissan Frontier- Video

Today on our 2014 Nissan Frontier we're going to install the Derale Series 8000 plate fin transmission cooler kit, part number D13502. Now to begin our install we're going to go ahead and remove the front grille. To remove the front grille we'll need to remove the multiple push pin fasteners that hold it in place. To remove the push pin fasteners we'll pry up on the center of the fastener and then remove it completely, just using a thin flat-bladed screwdriver. Now, behind the grille at the lower portion of it there are two more push pin fasteners, one on each corner. Go ahead and pry it free, then pull it out. Now with all our push pin fasteners removed, here along the bottom edge we just reach behind the front grille and gently pry it up on the six tabs to release them from the front bumper fascia. more

Watch Video

4/8/2015 6:26:06 AM

Derale Transmission Cooler Installation - 2005 Nissan Pathfinder- Video

Today on our 2005, Nissan Pathfinder, we'll be installing the Derale Series 8000, Plate Fin Transmission Cooler Kit, part number D13504. Before we can begin installation, we'll first need to remove the lower rock guard. To remove the rock guard there are multiple fasteners that will need to be removed. Were going to go ahead and remove the front grill. To remove the front grill we've got multiple fasteners across the top, and on the front.Then once the fasteners are removed we'll reach inside the grill and release the plastic fasteners holding it to the bumper cover. Now we'll go ahead and remove the grill and set it aside. more

Watch Video

1/20/2015 9:45:55 AM

Transmission Cooler Installation - 2009 Nissan Xterra- Video

Today on our 2009 Nissan Xterra we'll be installing the Derale Series 8000 Plate-Fin Transmission Cooler Kit, part number D13502. Our first step will be removing the manufacturer's grill. To do that, across the top there are six push-pin fasteners to be removed. To remove the push-pin fasteners, we'll take a flat-bladed screwdriver, pry on in the center and then remove the entire push-pin fastener. With all six removed, there are two center attachment points where we'll reach in through the top of the grill, press in the locking tab to release the two attachment points, and then there are four more underneath the center bumper support. We'll press on the locking tab, which will release the grill from its position. Now that we have the grill removed, you can see the fasteners that we're securing it. Now with the vehicle in the cold or cool temperature, we'll go ahead and start and run the vehicle until the transmission warms up, checking the temperature at both the in- and outlet, which will be determined as the vehicle warms up. more

Watch Video

10/7/2014 11:17:15 AM

  1